Order Online 24 Hours A day, 7 Days A Week, 365 Days A Year
Checks & Money Orders
|All personal information you submit is encrypted and 100% secure
BLUE WAVE® WATER BALANCE CHEMICALS
The first, most important step to proper pool care is to keep your pool water in balance. This will
ensure that you are getting the most effective use of your chemicals. Test daily to ensure that pH,
total alkalinity, calcium hardness and cyanuric acid (stabilizer) are within the correct levels.
Use as needed to raise the pH level to the ideal range of 7.2 to 7.6 ppm.
Slows the rapid loss of chlorine caused by low pH, and slows chlorine
dissipation, so your pool uses less chlorine. Stops eye irritation, etching
and corrosion caused by low pH. Contains sodium carbonate “soda ash”.
Recommended dosage: 1 lb. per 10,000 gallons
pH REDUCER THE SAFER ALTERNATIVE TO MURIATIC ACID!
Use as needed to lower pH to ideal range of 7.2 to 7.6 ppm. Stops eye
irritation, cloudy water, and scaling caused by high pH. Boosts chlorine’s
ability to fight bacteria and algae. Contains granular sodium bisulfate.
Recommended dosage: 6 oz. per 10,000 gallons
Use as needed to raise total alkalinity levels to the safe (non-corrosive)
zone. Stops eye irritation, equipment corrosion, and plater etching caused
by low alkalinity. Stabilizes pH balance in pool water and eliminates the
demand for unusually large amounts of pH adjusters. Enables chlorine to
work more effectively.
Recommended Dosage: Use 1-1/2 lbs. of Alkalinity Increaser to raise the
alkalinity approximately 10 ppm.
CUTS CHLORINE CONSUMPTION BY UP TO 25%!
Stabilizer pre-conditions your pool water to make chlorine last longer. Use
at the beginning of each season to protect chlorine from the sun’s
damaging effects and increase its effectiveness. Cyanuric Acid.
Dosage: 1-2/3 lbs. per 10,000 gallons.
Use as needed to raise the hardness (calcium) level in your pool to the
ideal range. Prevents water from becoming corrosive and damaging your
pool’s plumbing and heater. Stops staining and etching of pool surfaces
caused by low hardness levels. Great for use in areas where soft water is
Recommended dosage: 5 lbs. per 10,000 gallons to raise the hardness
approximately 40 ppm.